Preparation of fiber reinforced polypropylene mesh corrosion corrosion tape adhesive tape manufacturers, corrosion adhesive tape price, corrosion adhesive tape parameters, corrosion with a price, corrosion tape manufacturers, with prices pipeline corrosion, pipeline corrosion tape manufacturers use 2.1 features enhanced polypropylene mesh preparation of fiber corrosion tape (also known as polypropylene anticorrosion tape) is a new non-polluting, non-hazardous environmentally friendly anti-corrosion products, representing the current international and domestic cold-corrosion tape wrapped around the highest level, the "anti-corrosion crown" reputation. Preparation of fiber reinforced polypropylene mesh corrosion tape can be widely used in petroleum, natural gas, chemicals, urban construction, water supply and drainage, gas, gas transmission pipelines and steel underground steel storage tank external corrosion and repair works. Preparation of fiber reinforced polypropylene mesh corrosion tape is the Ministry of Construction, Environmental Protection Administration to specify an alternate "asphalt fiberglass cloth", "coal tar epoxy," the recommended products. Has a simple construction, impact resistance, aging resistance, stretching, resistance to ultraviolet radiation, the bond strength characteristics. Antiseptic preparation of fiber reinforced polypropylene mesh tape substrate is unique modified polypropylene woven fabric, made using butyl rubber modified asphalt anticorrosive layer. Antiseptic preparation of fiber reinforced polypropylene mesh tape substrate is fibrous structure can effectively resist the stresses arising due to soil creep damage, the aging test testing proved that the corrosion life of 50 years or more, much higher than the detection of indicators SY / T0414-98 standard, fully meet the U.S. ANSI/AWWAC209-00 and NACEMR0274-95 index. Preparation of fiber reinforced polypropylene mesh tape is a pipeline corrosion anti-corrosion construction tape in the cold the best choice, but also the most economical choice corrosion. 2.2 Performance No. Project Name polypropylene reinforced fiber corrosion tape 1 Model SXB-760 2 colors black, gray, green, or its color 3 Specification 50,75,100,150,250,300 4 Thickness (mm) 0.30 0.30 base film layer 0.70 0.55 0.40 0.50 0.95 1.00 1.05 0.85 0.90 1.10 1.15 Total thickness 1.65 6 1.20 1.40 1.50 1.60 Tensile strength Mpa ≥ 60 7 peel strength N / cm ≥ 45 on primed steel backing towards the tape dielectric strength ≥ 25 8 kv / mm ≥ 30 9 Volume resistivity Ω.m> 1x1012 10 Water vapor transmission rate (24h) mg/cm2 <0.45 11 Heat aging test (2400h) <25% 12 resistance to UV aging (168h) ≥ 80% 13 Water absorption <0.35% 14 Temperature (℃) 5-50 Related Products mainly include corrosion tape, polyethylene tape wrapped around the cold, 660 PE adhesive tape, polypropylene anticorrosion tape, aluminum foil anti-corrosion adhesive tape, butyl type electrical and electronic insulation products pipeline corrosion protection tape, etc.